Skip to main content

Filter By:

  • Show More Sizes
  • Show Fewer Sizes

Salsa Bikes

Salsa EXP Series Seatpack
The EXP Series Seat pack keeps gear high, centered, and in line with you and your bike. Much like a dry bag or stuff sack, the EXP Series Seat pack fits a wide range of load sizes, and dutifully carries anything you need on your next two-wheeled mission. - Water-resistant welded construction with waterproof fabrics - Roll type closure and air purging valve that allows for managing overall volume - Stretch cord storage on top - Durable 1000D material strategically placed in high wear areas - Weight: 380g - Capacity: 6 – 14 Liters
Salsa Warbird Carbon Apex 1 700
Warbird is Salsa's gravel race bike, designed to provide smooth performance on the roughest surfaces. It was built off years of experience racing in some of the nation’s premier gravel events like the Almanzo 100, Dirty Kanza 200, and 340-mile Trans Iowa. Carbon frame and fork deliver Salsa's Class 5 Vibration Reduction System to smooth out gravel’s often relentless chatter. The 700c Apex 1 build takes the speed and efficiency of 700 x 40c Maxxis Rambler tires on WTB rims, and mates them to a svelte, wide-range SRAM Apex 1x11-speed drivetrain that opens the door to hill-dominated landscapes with single-ring simplicity. Keep your cool and a double handful of control on the descents with the Warbird’s TRP Spyre C brakes, as powerful as they are easy to adjust and service, even in the field. With front and rear thru-axles and rock-solid Salsa and WTB cockpit components, the Warbird Apex 1 is ready for as many dusty miles on end as you care to grind out.
Salsa Warroad 105 650
Warroad is Salsa’s endurance all-road bike built to perform on-road, while being fully capable of off-pavement pursuits. It’s the bike for riders who don’t define a road ride by the surfaces they travel. Endurance all-road geometry, Class 5 frame Vibration Reduction System, dual wheel-size compatibility with a wide range of tire fitments, and a variety of mounting options set the Warroad apart. - Shimano 105 drivetrain - Shimano 105 hydraulic disc brakes - WTB ST i23 650B rims - WTB Byway 650B x 47mm tires
Salsa Warroad Ultegra 700
Warroad is Salsa’s endurance all-road bike built to perform on-road, while being fully capable of off-pavement pursuits. It’s the bike for riders who don’t define a road ride by the surfaces they travel. Endurance all-road geometry, Class 5 frame Vibration Reduction System, dual wheel-size compatibility with a wide range of tire fitments, and a variety of mounting options set the Warroad apart. - Shimano Ultegra drivetrain - Shimano Ultegra hydraulic disc brakes - WTB KOM Light i23 700c rims - WTB Exposure 700c x 30mm tires
Salsa Alternator 2.0 Hardware Kit
$4.99 - $5.99
Hardware is specifically designed for, and only compatible with, Salsa frames using the Alternator 2.0 dropout system. - For use on 2017 and newer alternator 2.0 Adjustable plates only - Please reference hardware kit FS2351 for fixed position plates - Please reference hardware kit FS2350 for adjustable plates
Salsa Frame Plugs
$4.99
Frame Plugs for Internal Cable Routing
Salsa Single Frame Plug for Dropper Routing 5-pack
$4.99
Single Frame Plug for Dropper Routing
Salsa Alternator 1.0 Set Screws
$5.00
Alternator 1.0 Set Screws
Salsa Alternator Flat Mount Hardware Kit
$5.99
Replacement hardware kit for Salsa Alternator Flat Mount dropouts. - For use only on frames designed for the Alternator Flat Mount standard
Salsa Chainstay Protector
$6.00 - $20.00
Chainstay protectors to guard your Salsa frame from scratches and damage.
Salsa QR Skewer Springs
$6.00
Salsa springs for Flip-Off skewers
Salsa EXP Series Direct Mount Thumb Screw
$9.99
The EXP Series Direct Mount Thumb Screws allow for quick and easy attachment of Salsa EXP Series Direct Mount Packs to bicycle frames equipped with direct-mount locations. - Can be installed and removed by hand or with allen key - Includes necessary 0.5 mm washers and 4 mm spacers - Sold in packages of two
Salsa Alternator 1.0 Hardware Kit
$10.00
Alternator Hardware Set for 2011–12 Ti frames and all 2013+ aluminum frames.
Salsa Bent Rack Struts
$10.00
- Diameter: 8mm - Overall Length: 345mm - After Bend: 270mm - 45 degree bend
Salsa Lock-on Collars
$10.00
- Open end allows use of bar ends, also while looking good - Compatible only with Salsa Backcountry Grips
Salsa Split Pivot Cable Guide Sevice Kit
$10.00
Salsa Pivot Service Kits
Salsa Backcountry Grips
$12.00
Salsa's Backcountry Grips are constructed of sticky, durable, supple rubber and are sized for comfortable use with or without gloves. - ADV BY BIKE text blocks sized for comfort with or without gloves - 143mm overall length
Salsa Cane Creek +3mm 40mm Lower Race Custom for Salsa
$12.00
Custom Cane Creek lower race for Salsa.
Salsa Salsa's Split Pivot Dropout Tool Top Cap
$13.99
Salsa's Split Pivot Dropout Tool might get you out of a jam, adding no weight to your equipment. This handy tool works as a headset top cap until you need it, and when combined with a 6mm hex wrench, turns into a socket for removing the Pivot Bolt to change your derailleur hanger - Lightweight aluminum bolt - For all Salsa Split Pivot suspension models - Integrated 22mm socket design interfaces axle nut to field-change the derailleur hanger - Operated via 6mm hex key found on most mini tools - Takes place of standard top cap - Eliminates the need to carry a 22mm wrench or socket in your pack - Lightweight, black anodized aluminum bolt included - 13g
Salsa 8mm Strut Mount Kit
$15.00
Mount struts to your heart's content with Salsa's 8mm Strut Mount kit.
Salsa High Direct Mount Front Derailleur Cover
$15.00
Covers front derailleur mount when running 1x
Salsa Lock-on Collars Closed-End
$15.00
- Closed-end design protects end of handlebar while looking good - Compatible with Salsa Backcountry Grips only - 30g for pair
Salsa Derailleur Hanger
$20.00
Replacement derailleur hangers for Salsa frames. Mounting screws included. Hanger 257 Fits: Salsa Ala Carte Ti 2011, Salsa El Mariachi Ti 2010-2012, Salsa Fargo 2011-2013, Salsa Fargo Ti 2011-2013, Salsa Spearfish 2011-2013 with QR Rear Triangles, Salsa Vaya 2011+, Salsa Vaya Ti 2011-2012, Salsa La Cruz Ti 2011, Salsa Beargrease 2013, Salsa Warbird 2013-2015, Salsa Warbird Ti 2013-2015, Salsa Colossal 2013+, Salsa Colossal Ti 2013-2014, Salsa Mamasita 2012-2013, Foundry Chilkoot 2016 Hanger for 2014+ Split Pivot Frames Fits: all Split Pivot Horsethief, Pony Rustler, Spearfish Bucksaw and Deadwood Suspension Hanger for 2015 Beargrease 2 and Cogburn CB4 Fits: Cogburn CB4 and Salsa Beargrease 2 2015
Salsa Derailleur Hanger For Beargrease Carbon
$20.00
Salsa Derailleur Hanger For Beargrease Carbon
Salsa Devour Socks
$20.00
Custom made for Salsa by Sockguy. Pair with the Devour Jersey and complete the look. - Made with ultra-wicking, breathable fabric to keep dry
Salsa Downtube Protector
$20.00
Protect your downtube from scratches and damage with Salsa protectors.
Salsa Gel Cork Tape
$20.00
Wrap your handlebars in comfort, luxury and style with Salsa's Gel Cork Tape. It's made from cork with a vibration-damping gel backing and is embossed with the Salsa logo. And, with a variety of palette-pleasing colors to choose from, you're sure to find your favorite one!
Salsa Glyph Gel Cork Bar Tape
$20.00
The Glyph Gel Cork Tape will add class to your rig, and feel good mile after mile. - Long wearing - Extra length for wider bars - Anti-slip gel backing - Patterned with symbols of the good life
Salsa Outdoor Kid T-Shirt
$20.00
Let the kiddo celebrate the outdoors while sporting Salsa's comfy kid's t-shirt. - Relaxed fit - Cotton
Salsa QBP Derailleur Hanger 687 Black
$20.00
Fits: Salsa Colossal Ti 2015, Salsa Warbird 2016, Foundry Overland 2016.
Page 1 of 6 Next page